The first is whether the material cylinder is in the center of the material cylinder bracket. If there is any abnormality in the material cylinder, please reinstall it; the second is whether the O-ring of the material cylinder piston is damaged. If it is damaged, please replace it. The third is that the piston and piston rod of the material cylinder may be tightened. If they are loose, they must be locked.

Beverage filling machinery

Beverage filling machinery produces a variety of products. However, if a failure occurs during production, it will have an impact on production that cannot be underestimated. Therefore, companies need to know more about possible situations that may arise in machinery and how to deal with them. It can ensure that the filling machine can complete production more efficiently, with high quality and at low cost. The following is a filling machine mechanical engineer summarizing common faults for your reference:

The filling amount of the filling machine is inaccurate or the material does not discharge.
If the opening is delayed, the thin cylinder throttle valve needs to be adjusted; the elastic force of the coil spring is compressed up and down in the quick-installation three-way control valve. If the elastic force is too large, the check valve will not open; whether the filling speed is too fast, adjust the filling speed rhythm. flow valve, reduce the filling speed; whether the speed throttle valve and filling interval throttle valve are closed, the throttle valve cannot be closed; whether there is any foreign matter in the quick-installation three-way control valve, if so, please sort it out, quick-installation tee Check whether there is air in the leather tube of the control valve and filling head. If there is air, try to reduce or remove the air.

Check whether all sealing rings are damaged. If damaged, please replace them with new ones; whether the filling nozzle valve core is jammed or delayed in opening. If it is jammed, reinstall the valve core into the correct position. Check whether all clamps and leather pipe buckles are sealed well. If so, please correct them; whether the magnetic switch is loose, please lock it after each adjustment.

The filling machine cylinder piston does not come back after being pushed to the top, and is pushed to the position of the magnetic switch. After pressing the emergency stop switch, the movable magnetic switch can be adjusted again.

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact With Us

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.